How To Install Foam Crown Moldings


Install foam crown molding with painters caulk. Austin Crown Molding. www.styrofoamcrownmolding.com

Seams and Joints

Our crown moldings are the most simple and easiest crown moldings to install in America
They install with simple painters caulk.
Just put a bead on the top where it meets the ceiling and a bead on the bottom
where it meets the wall. (only 2 of the 4 surfaces are needed)
Next, align the molding up to the wall and press firmly into place.
Then wipe off the excess caulk on the horizontal seams.
You have now installed your molding and finished your horizontal seams in one step.
Wood and MDF crown moldings absorb moisture and expand, then dry out and contract.
In most cases people try to buy crown molding to fit the full length of their room.
This usually results in a large amount of waste and difficulty in handling.
Our foam crown moldings do not contract or expand so you can use any length available. (8 Ft)
All you use on the vertical joints is sand-able spackle.
Just apply the spackle into the joint, wait until it dries and sand with 220 grit sandpaper.
Austin Crown Molding
Foam crown moldings made in America
Home     About Us      Contact Us    Site Map    Return Policies     Order By Phone   1 512 751 4477   

Hours - Monday - Friday 9 AM - 4:00 PM

1265 West Kilpatrick Street, Cleburne, Texas 76033
Austin Crown Molding